Type: Driver
File Name:
File Size: 29.4 MB
14 (3.36)
Downloads: 14
Supported systems: Windows 7/8/10, Windows XP 64-bit, Mac OS X 10.X
Price: Free* (*Free Registration Required)

Download Now

But all the research I did into OC'ing these chips points to no further changes needed for OC's under 4.

Windows 10 drivers - GA-Z68X-UD5-B3

As for setting the turbo, did you just set it to Gigabyte GA-Z68X-UD5-B3 Easy Tune6 and change each turbo core individually? But yeah, for the turbo I just manually set each multiplier manually to 44 regardless of number of cores being used. Boosted the power so it would have enough to run all four cores at that speed and that was it. If so, you might get better results turning that off and manually setting the timings to the rated values.


Did everything right but apparently the settings weren't right. I then tried using Easy Tune 6 The quickboost simply doesn't work, I'll click the setting, get the usual "overclocking will blah blah press continue to restart ect I do know of a youtube which does deal with gigabyte boards with the i5 and OCing it to 4.

GA-Z68X-UD5-B3 (rev. ) Motherboard - GIGABYTE Global

I read someone who is stable with it on using a 1. I like the idea of the cpu being low at idle and ramping up when needed. There is a sticky guides in this section, I posted the initial post but the guides are by Miahallen, it should Gigabyte GA-Z68X-UD5-B3 Easy Tune6 you get started http: If you PM Lsdmeasap he may instruct you on this. I think it just requires a jumper wire. I believe it helps to have the motherboard out of the case for this as well. I'm running F2, the latest version.

Lsdmeasap OK, well lets see how things go when you put a disk in there. It should prove to be very useful Lsdmeasap K, Good luck setting everything up!

I've tried diskpart to clean and format the disk, and it fails. Windows 7 installation fails. I have a very hard time finding the disk in my current Vista based system as an additional drive.

After much reading on Gigabyte GA-Z68X-UD5-B3 Easy Tune6 net and attempts OC we have found out it is more an art than science. During one of my attempts it seemed my system became slow and sluggish best and is still. Here is how we are currently configured.

Tried a different KB same problem. Ive even did what artdrivers suggested same problem.

How do I contact Gigabyte about this issue? The board is not under warranty.

I5 2500k 4.5 OC with Gigabyte Z68x-ud3h-b3

Then we'll advise back some settings to try. If you are past warranty they wont be able to help you. They will troubleshoot with you though, just not RMA. A keyboard is not needed as you can use the autoexec file to make it automatic. The problem with this arrangement is that you can't overclock for damn with the Intel H67 platform, and while you can overclock on Intel Gigabyte GA-Z68X-UD5-B3 Easy Tune6 motherboards, Gigabyte GA-Z68X-UD5-B3 Easy Tune6 chipset doesn't support FDI at all. Not bad, but with this same test platform reconfigured to run off the Intel HD integrated graphics core, the same MB video was transcoded in a mere 14 seconds with help of QuickSync.

New UEFI bios updates for some older Gigabyte boards

What is LucidLogix Virtu? In the preferred method, the monitor is connected to a discrete videocard and Virtu virtualizes the IGP when required d-Mode. In fact, with a touch screen monitor, GIGABYTE Touch BIOS™ is as easy to use as Z68 chipset-based motherboard and an Intel Core i3/i5/i7 series g: Tune6. Updated to Windows 10 (from 7) just in time before the free update Gigabyte GA-Z68X-UD5-B3 Easy Tune6 expired. The Download page has a distinct lack of drivers for the Mobo  Missing: Easy ‎Tune6.

Other Drivers